Barton Complete Recirculating Ball Bearing Mainsheet Traveller Systems
Pre-packaged mainsheet systems with all components required in one complete kit – sliding bolt track, traveller, end fittings, plastic end caps, pilot track and full fitting instructions.
Travellers, end fittings and track are all extruded from top quality marine grade aluminium and finished in our unique 'Spectro' grey anodised finish.
Sliding bolt track allows for a smooth, clean profile and also makes retro-fitting easier as bolts can be slid along the extrusion to match existing fastening holes.
- Two sizes – for yachts up to 11m LOA (36ft)
- 2:1 or 4:1 purchase systems
- Recirculating precision ground delrin ball system.
|Specifications||Size 1||Size 2|
|Max Boat Size||8.5m
|Max control line Ø||6mm||8mm|
Guide to choice of size:
Size 1 for yachts up to 8.5m (28.5ft)
Size 2 for yachts up to 11.0m (36ft)
Important note: boat sizes
Suggested boat sizes are given as guidance only and assume a monohull with boom end sheeting, loaded vertically to the traveller.
Mid-boom sheeting and severely angled take offs can impose greater loads and suitable allowances should be made for this. If at all unsure of your choice it is important to seek further advice.
If you are close to the maximum boat size suggested, we would advise upgrading to the next size up.
Only the Removeable complete pack kits are suitable for open span applications as they require beam section track. If you require a fixed spanning mainsheet track system, please drop us an email with details and we will price it for you.